Toshiba PORTEGE M300 Maintenance Manual page 294

4.29 Wireless antennas /Front panel
4. Remove the following screw and front panel while releasing latches.
M2.0x3.0S
M2.0x3.0 S-THIN FLAT BIND
Installing the wireless antennas / Front panel
To install the wireless antennas / Front panel, follow the steps below and refer to figure 4-45
and 4-46.
1. Install the front panel and secure it with the following screw.
M2.0x3.0S
2. Passing wireless LAN antennas through the guide slit, stick them on the LCD cover.
3. Passing bluetooth antenna through the guide slit, stick it on the LCD cover.
4. Fix wireless LAN antenna cables with two insulators on both sides.
5. Arrange the wireless antenna cables on the LCD cover and fix them with six acetate
tapes.
4-66
S-THIN FLAT BIND screw
Figure 4-46 Removing the front panel
S-THIN FLAT BIND screw
4 Replacement Procedures
×1
Front panel
×1
PORTEGE M300 Maintenance Manual (960-504)