4 Replacement Procedures
4.9
Switch membrane board
Removing the Switch membrane board
The following describes the procedure for removing the switch membrane board (See Figure
4-20).
1. Open the display and unlock the connector. Disconnect the switch membrane board
cable from the connector CN3280 on the system board.
2. Remove the following screw securing the switch membrane board.
•
3. Slide the switch membrane board to the left and remove it.
M2.5x2.8B THIN BIND
Switch membrane
board Cable
4-30
[CONFIDENTIAL]
M2.5x2.8B
THIN BIND screw
Switch membrane board
Figure 4-20 Removing Switch membrane board
Satellite A50S/TECRA A3X Maintenance Manual (960-534)
4.9 Switch membrane board
x1
CN3280