H/W(Hardware) Initial Information Setting Tool; Heatrun Test Program - Toshiba PORTEGE M300 Maintenance Manual

3 Tests and Diagnostics
3.1.2 H/W (Hardware) initial information setting tool
The H/W initial information setting tool consists of the following programs.
Initial configuration
Region write
DMI information save
DMI information recovery
System configuration display
E2PROM test (MAC/GUID/DMI)
You will need the following equipment to perform some of the programs.
The Diagnostics Disk (Main T&D)

3.1.3 Heatrun test program

The heatrun test starts automatically after the selection.
You will need the following equipment to perform this program.
The Diagnostics Disk (Main T&D)
PORTEGE M300 Maintenance Manual (960-504)
3.1 The Diagnostic Test
3-3