Display Latch - Toshiba PORTEGE M300 Maintenance Manual

4 Replacement Procedures

4.24 Display latch

Removing the display latch
To remove the display latch, follow the steps below and refer to figures 4-38 and 4-39.
1. Remove the following screws and remove the LED panel.
M2.0x4.0B
2. Part the display latch assembly from the LED panel.
3. Release the tabs and disassemble the display latch assembly.
Spring
Figure 4-39 Disassembling the display latch assembly
PORTEGE M300 Maintenance Manual (960-504)
BIND screw
M2.0x4.0B BIND
Display latch assembly
Figure 4-38 Removing the LED panel
Tab

4.24 Display latch

×4
LED panel
Tab
4-53