Bluetooth - Toshiba PORTEGE M300 Maintenance Manual

4.8 Bluetooth

4.8

Bluetooth

Removing a Bluetooth
To remove a bluetooth, follow the steps below and refer to figures 4-14.
1. Remove the following screw securing a bluetooth module.
M2.0×3.0S
2. Disconnect the blutooth flat cable from both a bluetooth module and connector
CN4400 on the system board.
3. Disconnect the bluetooth antenna cable from a bluetooth module.
Bluetooth module
Bluetooth flat cable
Installing a Bluetooth
To install a bluetooth, follow the steps below and refer to figures 4-14.
1. Connect the bluetooth antenna cable to the connector on a bluetooth module
2. Connect the bluetooth flat cable to both a bluetooth module and the connector
CN4400 on the system board.
3. Install a bluetooth module along the guide and secure it with the following screw.
M2.0×3.0S
4-24
S-THIN FLAT BIND screw
Figure 4-14 Removing a bluetooth module
S-THIN FLAT BIND screw
4 Replacement Procedures
×1
M2.0x3.0S S-THIN FLAT BIND
Bluetooth antenna cable
CN4400
×1
PORTEGE M300 Maintenance Manual (960-504)