Toshiba PORTEGE M300 Maintenance Manual page 259

4 Replacement Procedures
12. Remove the following screws securing the hinge caps and remove the hinge caps.
M2.5x8.0B
13. Remove the following screws securing the hinges and remove the hinges.
M2.5x8.0B
14. Part the display assembly from the base assembly and put it apart with antenna
cables connected between both assemblies.
M2.5x8.0B FLAT BIND
[with Locktight]
Base assembly
PORTEGE M300 Maintenance Manual (960-504)
FLAT BIND screw
FLAT BIND screw
Display assembly
Hinge
Figure 4-20 Removing the display assembly
×2
×2
M2.5x8.0B FLAT BIND
[with Locktight]
Hinge cap
M2.5x8.0B FLAT BIND
Hinge cap
4.10 Display assembly
M2.5x8.0B
FLAT BIND
4-31