Disassemble And Modification; Power Cord - Konica Minolta BIZHUB C203 User Manual

2

Disassemble and modification

7 WARNING
Ignoring these warnings could cause serious injury or even death.
% Do not ignore these safety advices.
Warning
• Do not attempt to remove the covers and panels which have been fixed to the product.
Some products have a high-voltage part or a laser beam source inside that could
cause an electrical shock or blindness.
• Do not modify this product, as a fire, electrical shock, or breakdown could result. If the
product employs a laser, the laser beam source could cause blindness.

Power cord

7 WARNING
Ignoring these warnings could cause serious injury or even death.
% Do not ignore these safety advices.
Warning
• Use only the power cord supplied in the package. If a power cord is not supplied, only
use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure
to use this cord could result in a fire or electrical shock.
• Use the power cord supplied in the package only for this machine and NEVER use it
for any other product. Failure to observe this precaution could result in a fire or elec-
trical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage
the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.)
could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power switch, un-
plug the power cord from the power outlet, and then call your authorized service rep-
resentative.
2-4
Downloaded From ManualsPrinter.com Manuals
Installation and operation precautions
Symbol
Symbol
bizhub C353/C253/C203 (FE2)