Specifying The Transmission Settings - Konica Minolta BIZHUB C203 User Manual

4

Specifying the transmission settings

When sending a fax, you can specify the transmission settings in the Fax Mode Details dialog box that
appears when the [Fax Mode Setting Details] button is clicked in the FAX Transmission Popup dialog box.
Item
Print Recipient File
Timer Send
SUB Address
Sender ID
Note
When using Timer Send, check that the time set on the computer is synchronized with the time on this
machine. If the transmission time is earlier than the current time of this machine, the fax is sent the next
day.
If sending confidential faxes using F-codes to another fax model, enter the sub address and sender ID
in the "SUB Address" and the "Sender ID" text boxes. Up to 20 characters (numbers 0 through 9) can
be entered in the "Sub Address" text box. Up to 20 characters (numbers 0 through 9, #, and *) can be
entered in the "Sender ID" text box. For the details on the sub address and the sender ID, refer to
"F-Code TX" on page 6-100.
4-46
Downloaded From ManualsPrinter.com Manuals
Function
Prints the document after a fax was sent.
Sets the transmission time. By clicking the [Reflect Current Time] button, the current
time set on the computer is displayed in the "Send Time" boxes.
Specifies the sub address for sending confidential faxes using F-codes.
Specifies the sender ID for sending confidential faxes using F-codes.
Print Operations
bizhub C353/C253/C203 (FE2)