Continuous Scan - Kyocera TASKalfa 250ci Operation Manual

Copying Functions

Continuous Scan

When a large number of originals cannot be placed in the document processor at one time, the originals can be
scanned in separate batches and then copied as one job. With this function, originals are scanned until you
press [Scan Finish].
Any of the following settings can be changed during scanning.
• Original size selection
• Original orientation
• Image quality selection
• Type of original (2-sided/book original)
• Zoom
• Border erase
• Density
• Color Selection
If you use Job Build, you can insert a blank paper during scanning or a blank page during duplex copying.
The procedure for making copies using Continuous Scan is explained below.
Ready to copy.

Continuous Scan

Off
On
Place original.
Job Build
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
Scan next original(s).
Place the originals and press Start key.
Press [Finish Scan] to start copying.
Job No.: 000021
Scanner Setting
Original Original
Size Orientation
2-sided/Book
Zoom
Original
Density
Status
4-42
Downloaded From ManualsPrinter.com Manuals
Select desired binding orientation.
Binding Binding
Left Right
Cancel
Job Name: doc20080505113414 User Name: -----
Finishing
Original
Image
Next Copy: On Front
Border Erase
Next Copy:
On Back
Sheet
Insertion
1/2
Cancel
1
Press the Copy key.
2
Press [Advanced Setup] and then [Continuous
Scan].
3
If Continuous Scan is selected, press [On].
Copies
If Job Build is selected, press [Job Build] and select
desired binding orientation.
Binding
Top
OK
10/10/2008 10:10
4
Press [OK].
5
Place the originals in the document processor or on
Copies
1
the platen and press the Start key.
If [Job Build] is selected, the next page can be
pages
changed. Press [Sheet Insertion] to insert a blank
paper. Press [Next Copy: On Back] in duplex
copying to print the next page on back page.
Finish Scan
10/10/2008 10:10
OPERATION GUIDE