One-Touch Image Adjust - Kyocera TASKalfa 250ci Operation Manual

One-touch Image Adjust

Adjust images as desired to more vivid or more dull images.
The items that may be configured are as follows: Vivid, Dull, Sharp, Smooth, Light, Dark
Refer to the sample image in Quick Guide to Adjusting Image Quality for examples of the effect of each setting.
NOTE:
This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see page 3-14).
This feature can not be used together with Color Balance Adjust (see page 4-16).
Select from one of the 6 available One Touch Image Adjust types. Multiple selections are not possible.
Follow the steps below to use One-touch Image Adjust.
Ready to copy.

One-touch Image Adjust

Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Copies
Adjust images as desired.
Off
Vivid Dull Sharp
Smooth Light Dark
Cancel
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then press [One-
touch Image Adjust].
4
Select the image.
OK
10/10/2008 10:10
5
Press [OK].
6
Press the Start key. Copying begins.
Copying Functions
4
4-19