Device/Communication - Kyocera TASKalfa 250ci Operation Manual

Device/Communication

Configure the devices/lines installed or connected to this machine or check their status. You can also control
devices depending on their status.
Displaying Device/Communication Screen
The procedure for using the Device/Communication screen is explained below.
Check of Device Status
Status
Scanner
Ready.
Printer
Ready.
Removable Memory
Not connected.
Format Remove
FAX Port 1
Dialing...
Line Off Manual RX
FAX Log
Printing Jobs Sending Jobs
Status
The items you can check are described below.
Scanner
The status of an original scanning in the document processor (optional) or the error information (paper jam,
opened cover, etc.) is displayed.
Printer
Error information such as paper jam, out of toner, or out of paper, and status such as waiting or printing are
displayed.
Hard Disk
The information such as formatting, overwriting for erasure, and error occurrence is displayed.
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Hard Disk
Overwriting...
FAX Port 2
Receiving...
Line Off
i-FAX Check New FAX
Storing Jobs Device/
Paper/Supplies
Communication
10/10/2008 10:10
1
Press the Status/Job Cancel key.
2
Press [Device/Communication]
The screen to check the status or configure the
devices is displayed.
Status / Job Cancel
7
7-17