Kyocera TASKalfa 250ci Operation Manual page 359

WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is On. Use the procedure below.
WSD Print Setup
Select whether or not to use WSD Print. The default setting is On. Use the procedure below.
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Default Setting (System Menu)
1
Press the System Menu key.
2
Press [System], [Next] of Network and then
[Change] of WSD Scan.
3
Press [On] or [Off].
4
Press [OK].
5
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-88.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then
[Change] of WSD Print.
3
Press [On] or [Off].
4
Press [OK].
5
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-88.
8
8-95