Installing Software - Kyocera TASKalfa 250ci Operation Manual

Preparation before Use
AppleTalk Setup
Select the Apple Talk network connection. The default setting is On.
Use the procedure below to setup the AppleTalk setting.

Installing Software

Install appropriate software on your PC from the included Product Library CD-ROM (Product Library) if you want
to use the printer function of this machine or perform TWAIN / WIA transmission or FAX transmission from your
PC.
NOTE:
Installation on Windows XP, Windows 2000, Server 2003 and Windows Vista must be done by a user
logged on with administrator privileges.
Plug and Play is disabled on this device when in Sleep Mode. Wake the device from Low Power Mode or Sleep
Mode before continuing. See Low Power Mode and Auto Low Power Mode on page 3-4 and Sleep and Auto
Sleep on page 3-5.
2-12
Downloaded From ManualsPrinter.com Manuals
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Change] of IPv4.
6
Press [Bonjour].
7
Press [On] or [Off] of Bonjour and then press [OK].
8
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-88.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then
[Change] of AppleTalk.
3
Press [On] or [Off].
4
Press [OK].
5
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-88.
OPERATION GUIDE