Kyocera TASKalfa 250ci Operation Manual page 338

Default Setting (System Menu)
Address:
Name E-mail
SMB
Host Name
Path
Login User Name
Login Password
Status
Adding a Group
Compile two or more individuals into a group. Designations in the group can be added at the same time. When
adding a group, a maximum of 500 groups can be added in the Address Book.
NOTE:
Before adding a group in the Address Book, the individuals to be included in the group must be added
first. Up to 100 destinations for the e-mail, 500 destinations for the FAX, and the total of 10 destinations for the
FTP and SMB can be registered per a group.
Use the procedure below to register a group.
Address:
Name Member
Address Number
Name
Status
8-74
Downloaded From ManualsPrinter.com Manuals
SMB FTP FAX i-FAX
Change
:
Change
:
Change
:
Change
: **********
Connection
Test
Cancel Back
Change
: 0022
Change
: ABCABC
Cancel Back
NOTE:
Appendix-7 for details on entering characters.
Press [Connection Test] to check the connection to
the computer you chose. If the connection fails,
check the entries you made.
Register
10/10/2008 10:10
9
Check if the destination entry is correct and press
[Register]. The destination is added to the Address
Book.
1
Press the System Menu key.
2
Press [Edit Destination], [Register/Edit] of Address
Book, [Add], [Group] and then [Next].
3
To specify the address number, press [Change] in
Address Number.
Register
10/10/2008 10:10
4
Use [+]/[-] or the numeric keys to enter an address
number (1 to 2500).
To have the number assigned automatically, set
"0000".
Refer to the Character Entry Method on
OPERATION GUIDE