Kyocera TASKalfa 250ci Operation Manual page 91

Book to One-sided
1
Book to Two-sided
1 2
2 1
Original
The procedure for using two-sided/duplex copying is explained below.
Ready to copy.
Duplex
1-sided
>>1-sided
1-sided
Place original.
>>2-sided
2-sided
>>1-sided
2-sided
>>2-sided
Original : ---
Book
Zoom :
100%
>>1-sided
Paper : ---
Book
Preview
>>2-sided
Add Shortcut
Status
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
2
1
Original Copy
Facing pages
Facing pages
-> Facing pages
-> Two-sided
3
3 4
1
3
4 3
1
Copy
Finishing
Binding Binding
Left/Right Top
Cancel
Produces a 1-sided copy of a 2-sided or open book
original.
2
The following binding options are available.
• Binding Left: Originals with facing pages are
copied from left to right.
• Binding Right: Originals with facing pages are
copied from right to left.
NOTE:
The following sizes of originals and paper are
supported in Two-sided to One-sided and Book to One-
sided. Original: Ledger, Letter-R, A3, B4, A4-R, B5-R,
A5-R and 8K. Paper: Letter, A4, B5 and 16K. You may
change paper size and reduce or enlarge copy to
match that size.
Produces two-sided copies from an open book original
with facing pages.
1 2
NOTE:
The following sizes of originals and paper are
supported in Book to Two-sided mode. Original:
Ledger, Letter-R, A3, B4, A4-R, B5-R, A5-R and 8K.
2 1
Paper: Letter, A4 and B5.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Duplex].
4
Select the desired Duplex option.
Copies
Top Edge Top
Original
Orientation
OK
10/10/2008 10:10
Basic Operation
3
3-19