Kyocera TASKalfa 250ci Operation Manual page 227

Form Overlay from Custom Boxes
This function allows you to retrieve images (image files), overlay them into documents stored in custom boxes
and then print the results.
Use the procedure below.
Box:
File Name
0001 0404200710574501
0002 0404200710574511
0003 0404200710574521
Print Send
Status
Ready to store in Box.
File Name:
Form Overlay
Off
Select
Place original.
Stored Form
:
Original ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Date and Time Size
10/10/2008 09:40 21 MB
10/10/2008 09:50 21 MB
10/10/2008 10:00 21 MB
1/1
Detail
Preview
Join Move/Copy Delete Store File
Copies
Density (10 - 100)
100
%
Off
Cancel
1
Press the Document Box key.
2
Press [Custom Box], select the box containing the
document you want to overlay the image into and
print, and then press [Open].
NOTE:
If a custom box is protected by a password,
enter the correct password.
3
Select the document you wish to print by checking
the checkbox.
The document is marked with a checkmark.
NOTE:
To deselect, press the checkbox again and
remove the checkmark.
Close
10/10/2008 10:10
4
Press [Print].
5
Press [Functions], [Form Overlay], [Select Stored
Form], and then [Select Form].
NOTE:
You can change the form density setting
through 10 levels from 10% to 100%. Press the [+] or
[-] buttons in Density.
Select
Form
OK
10/10/2008 10:10
6
In Form Overlay - Select Form, select the image file
to be overlaid onto the document from the
displayed document boxes.
You can only select one image file.
7
Press [OK].
8
Press [OK] again to return to the Functions screen.
9
Press the Start key. Printing begins.
Document Box
6
6-7