Config Atm Info Command; Table 19 Config Atm Pvc 1483 Ip Command Parameters And Variables; Table 20 Config Atm Pvc 1483 Ipx Command Parameters And Variables - Nortel Passport Module 8672A Using Manual

Table 19 config atm pvc 1483 ip command parameters and variables

Parameters and variables
create <vid> <vpi.vci> <remoteip> Creates a routed 1483 IP circuit on the specified VLAN to the
delete <vid>
info
Table 20
1483 ipx command.

Table 20 config atm pvc 1483 ipx command parameters and variables

Parameters and variables
create <vid> <vpi.vci> <ipx>
delete <vid>
info

config atm info command

Figure 27
info
Chapter 5 Managing the Passport 8672ATM Module with the CLI
Description
specified remote router interface. The optional parameters are:
• vid means VLAN ID number.
• vpi.vci means circuit VPI number and the circuit VCI numbers,
respectively; they are separated by a period.
• remoteip is the IP address of the remote router interface.
Note that the VLAN ID can exist only on this port.
Deletes the routed 1483 IP circuit on the specified VLAN.
Displays information on routed 1483 IP circuits.
describes the parameters and variables for the config atm pvc
Description
Creates a routed 1483 IPX circuit on the specified VLAN to the
specified remote router interface. The optional parameters are:
• vid means VLAN ID number.
• vpi.vci means circuit VPI number and the circuit VCI numbers,
respectively; they are separated by a period.
• ipx is the IPX Network number of the remote router interface. If this
number is not given, the first IPX Network number configured for
the specified VLAN is used.
Note that the VLAN ID must be previously configured for IPX on this
port.
No ARP functionality is available on this IPX segment.
Deletes the routed 1483 IPX circuit on the specified VLAN.
Displays information on routed 1483 IPX circuits.
shows a sample of the output resulting from executing the
command.
Using the Passport 8672ATM Module
81
config atm