Chapter 6 Configuring the Passport 8672ATM Module
Creating two VLANs "byPort"
To create two VLANs "byPort," see
ports" on page
119. One VLAN must have only one ATM port. The second
VLAN can have one or multiple Ethernet ports.
Assigning IP addresses
To assign an IP address to both VLANs:
1
From the Device Manager menu bar, choose VLAN > VLANs.
The VLAN dialog box opens with the Basic tab displayed
page
120).
Table 41 on page 120
2
Click one of the VLANs.
3
Click IP.
The IP, VLAN dialog box opens with the IP Address tab displayed
(Figure
57).
Figure 57 IP Address tab
Table 44
describes the IP Address tab fields.
IP Address tab
Table 44
Field
Ip Address
Net Mask
BcastAddrFormat
ReasmMaxSize
"Creating a VLAN "byPort" and adding
describes the fields in the VLAN Basic tab.
fields
Description
IP address of the VLAN
Subnet mask associated with the IP address of the entry.
IP broadcast address format used on this interface.
Size of the largest IP datagram which this entity can
re-assemble from incoming IP fragmented datagrams
received on this interface.
(Figure 52 on
Using the Passport 8672ATM Module
129