Enabling Rip Routing; Figure 59 Rip Tab; Table 46 Rip Tab Fields - Nortel Passport Module 8672A Using Manual

Chapter 6 Configuring the Passport 8672ATM Module

Enabling RIP routing

1
From the Device Manager menu bar, choose VLAN > VLANs.
The VLAN dialog box opens with the Basic tab displayed
Table 41 on page 120
2 Click one of the VLANs.
3 Click IP.
The IP, VLAN dialog box opens with the IP Address tab displayed
on page 129).
Table 44 on page 129
4 Click the RIP tab.
The RIP tab opens

Figure 59 RIP tab

Table 46 describes the RIP tab fields.

Table 46 RIP tab fields

Field
Enable
Supply
describes the VLAN Basic tab fields.
describes the IP Address tab fields.
(Figure 59).
Description
IP address of the VLAN.
Enables or disables RIP supply on the specified interface.
Using the Passport 8672ATM Module
131
(Figure 52).
(Figure 57