Resetting The Module - Nortel Passport Module 8672A Using Manual

54 Chapter 4 Managing the Passport 8672ATM Module with Device Manager
Table 5 Interface tab items (continued)
Item
Action
Result
From the Interface tab, select other ATM-specific tabs to configure the port or
change current or default configurations.

Resetting the module

To reset the module:
1
Highlight the module.
2 Choose Edit > Card.
The Card dialog box opens with the Card tab displayed
209195-A
Description
Sets one of the following port-related actions:
• none
• flushMacFdb—flush MAC forwarding table for port
• flushArp—flush ARP table for port
• flushIp—flush IP route table for port
• flushAll—flush all tables for port
• triggerRipUpdate—manually update the RIP table
Displays result from the last system action.
(Figure 13).