Appendix D
Configuring for interoperability
This chapter explains the requirements and procedures for setting up different
vendor hardware or software to interoperate with the VPN Router. You can use
these instructions to establish encrypted tunnels to and from the VPN Router with
the noted vendors. These requirements and procedures are subject to change based
on hardware and software changes by the vendors.
Procedures are available for the following products:
•
•
•
•
Configuring the Cisco 2514 router, Version 11.3
To set up the VPN Router to establish encrypted tunnel connections with the
Cisco 2514 router, as shown in
Show Configuration command.
Cisco* 2514 router, Version 11.3
SafeNet, Inc. (IRE), SafeNet*/Soft-PK Security Policy Database Editor,
Version 1.0
Third-party clients
Internetwork Packet Exchange (IPX)
Figure
11, configure the Cisco 2514 with the
Nortel VPN Router Troubleshooting
207