Nortel NN46110-602 Troubleshooting Manual page 117

To configure a capture object:
1
Navigate to Capture Configuration mode by entering the
with the object name.
capture ether0
CES#
CES(capture-ethernet)#
The resulting prompt shows the type of capture object (physical interface,
tunnel, or global IP).
2
Display all parameters that you can configure for that type of capture object.
CES(capture-ethernet)#
Packet capture mode
direction
exit
filter
length
no
promiscuous
trigger
wrapping
CES(capture-ethernet)#
3
Edit one or more parameters as required.
Note: The
promiscuous
objects only.
For the syntax of any command, see the Nortel VPN Router Using the Command
Line Interface (NN46110-507).
?
Captures in one direction
Exits capture mode
Applies interface traffic filter to
capture only matching traffic
Specifies how many octets to capture for
every packet
Disables features and settings
Enables promiscuous mode when capture is
running
Enables triggers
Continues capturing when buffer gets full
parameter is available for Ethernet capture
Chapter 5 Packet capture 117
capture
Nortel VPN Router Troubleshooting
command