Table of Contents
Advertisement
•
Delete a capture object or capture files when you no longer need them to free
up memory or disk space.
•
Do not run capture objects for physical interfaces or tunnels at the same time
that you run the global IP capture object (some packets are captured more
than once).
Enabling packet capture on a VPN Router
You must have a serial connection to capture packets. You cannot enable packet
capture through a Telnet session.
To prepare to run packet capture on the VPN Router:
1
If necessary, boot the VPN Router with a software version that has the PCAP
feature.
2
Turn on the terminal or PC.
3
Configure the terminal or PC as follows:
•
9600 baud
•
8 data bits
•
1 stop bit
•
No parity
•
No flow control
4
Connect the serial cable (supplied with the VPN Router) from the VPN
Router serial port to the terminal or to the communications port on the PC.
5
On the PC, start HyperTerminal
click Enter.
The Welcome window appears.
Welcome to the VPN Router
Copyright (c) 2007 Nortel Networks Ltd.
Version:
Creation date:
Date:
Unit Serial Number: 317563
Please enter the administrator's user name:
*
or another terminal emulation program and
V04_90.185
May 27, 2004, 20:51:06
05/27/2004
Nortel VPN Router Troubleshooting
Chapter 5 Packet capture 111
Advertisement
Table of Contents
Troubleshooting
