Nortel NN46110-602 Troubleshooting Manual page 202

202 Appendix C System messages
Unable to get configuration for VR xxx
Description: This is an error event that is logged when VRRP is enabled but the
common configuration parameters are missing. These are the items set in the
Routing > VRRP window.
Action: No action required.
RIP xxx: RIP Enabled
Description: Logged when RIP is globally enabled.
Action: No action required.
RIP xxx: RIP Disabled
Description: Logged when RIP is globally disabled.
Action: No action required.
RIP xxx: Can't alloc main node
Description: Logged when there is not enough memory to allocate RIP
parameters.
Action: No action required.
RIP xxx: Circuit xxx created
Description: Logged when the RIP circuit is created. The parameter stands for
circuit ID.
Action: No action required.
NN46110-602