Applying The Software; After You Upgrade The Software - Nortel NN46110-602 Troubleshooting Manual

— Response Timeout for RADIUS Accounting Server
— External RADIUS Accounting Server
b Click OK.

Applying the software

After you start the apply process, do not make any queries on the VPN Router.
Queries try to access files and can cause problems during the upgrade process.
To apply the new software:
1
Select Admin > Upgrades.
2
From the Apply New Version list, select the software version that you just
downloaded.
3
Click Apply to start the upgrade process.

After you upgrade the software

After the VPN Router reboots itself with the upgraded software, follow these
steps:
1
Wait 2 minutes after the reboot before you run queries to make sure that all
startup processes had time to read the files they need.
2 If you are managing the VPN Router remotely, connect to the VPN Router
over a user control tunnel.
3
Clear the cache on your browser and close all browser windows.
4 Restart your browser, log on to the VPN Router, and navigate to Status >
System. Check the Software Version field to verify that the new software
version is applied.
5 Select Admin > Shutdown and deselect Disable new logins.
Caution: If you do not follow the next step, the VPN Router shuts
down.
Chapter 3 Administrative tasks 67
Nortel VPN Router Troubleshooting