Nortel NN46110-602 Troubleshooting Manual page 186

186 Appendix C System messages
Session: xxx[xxx]:xxx xxx auth method not allowed
Description: The authentication method of the incoming request is not allowed in
the group that the session is bound to. The session is bound to a group by one of
the following:
•
•
•
•
Action: Enable the authentication method for the bound group.
Session: xxx[xxx]:xxx—authentication failed using all
authservers
Description: The incoming request cannot be authenticated by any configured
authentication servers (LDAP, RADIUS, or CA).
Action: Provide the correct credentials. For example, create a new user account.
Session: xxx[xxx]:xxx AddLink failed [xxx] current links xxx
Description: The multilink session cannot be created. This is caused by any of the
following:
•
•
•
•
•
•
Action: Verify the correct settings for each of the possible causes.
NN46110-602
the group that the user's account is in (in LDAP)
RADIUS default group
RADIUS class attribute
CA authentication server's default group
New logins are disabled.
The max sessions on the VPN Router is reached.
There is not enough heap on the VPN Router.
The call admission priority slot is full.
The call admission priority slot is outside of access hours.
The max links configured for the group is reached.