Nortel NN46110-602 Troubleshooting Manual page 118

118 Chapter 5 Packet capture
Tunnel capture parameters
Capture objects for tunnels have several unique parameters. The following
example creates a tunnel object called bot1, navigates to Capture Configuration
mode, and displays the commands for tunnel objects. The commands in bold are
the commands that are available only for tunnel objects. For more information
about tunnel capture objects, see
CES#
CES#
CES(capture-tunnel)#
Packet capture mode
direction
exit
filter
length
no
persistent
remoteip
trigger
type
userid
wrapping
CES(capture-tunnel)#
For the syntax of any command, see the Nortel VPN Router Using the Command
Line Interface (NN46110-507).
NN46110-602
capture add bot1 tunnel
capture bot1
?
Captures in one direction
Exits capture mode
Applies interface traffic filter to capture
only matching traffic
Specifies how many octets to capture for
every packet
Disables features and settings
Restarts capture on session disconnect
Captures sessions from this IP address
Enables triggers
Captures only sessions of specific type
Captures sessions from this user
Continues capturing when buffer gets full
"Tunnel captures" on page 106.