Enabling The Vibrator; Enabling The Key Sound - Nortel DECT 4027 User Manual

Enabling the Vibrator

Attention: The Vibrator feature is available on the DECT 4070 and
If you enable the Vibrator feature, the handset vibrates to alert you about
incoming calls. You can configure the handset to vibrate, ring, or both.
To enable the Vibrator feature, perform the following steps:
Vibrate then ring
Vibrate and ring

Enabling the Key sound

If you enable the Key sound feature, a sound occurs when you press a
key.
Get user manuals: See SafeManuals.com
4075 Handsets only.
1. Open the
in "Accessing the Sounds and alerts menu"
(page
2. Press the
option.
Vibrator
3. Press the
Select
4. Press the
Vibrate then ring,
Off
5. Press the
Select
6. Press the
idle display.
Sounds and alerts
167).
Up or Down key to highlight the
Select soft key.
Up or Down key to select
or Vibrate and
Select soft key to apply the changes.
Clr key one or more times to return to the
Telephone settings
menu using the steps
Vibrator
Off (disabled),
ring.
175