Printed Colors Of Lines Are Inaccurate During Hp-Gl/2 Printing; Hp-Gl/2 Jobs Are Printed 6 Mm Larger Than Specified; Hp-Gl/2 Jobs Are Printed At Maximum Size, Even If A Standard Size Is Specified; Hp-Gl/2 Printing Takes A Long Time - Canon iPF840 User Manual

iPF840

Printed colors of lines are inaccurate during HP-GL/2 printing

Printed colors of lines are inaccurate during HP-GL/2 printing
Cause
AdjustFaintLines is On in the Con-
trol Panel menu.

HP-GL/2 jobs are printed 6 mm larger than specified

HP-GL/2 jobs are printed 6 mm larger than specified
The page size of the HP-GL/2 print job, as created in the source application, is
incorrect.

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
The page size of the HP-GL/2 print job, as created in the
source application, is incorrect.

HP-GL/2 printing takes a long time

HP-GL/2 printing takes a long time
Large print jobs with a lot of data take longer to print.
A job was printed when Input Resolution in the Control
Panel menu was set to 600dpi.

The printer stops when printing a HP-GL/2 job (the carriage stops moving)

The printer stops when printing a HP-GL/2 job (the carriage stops moving)
Cause
The printer is analyzing the print job.
A job was printed when Input Resolution in the Control
Panel menu was set to 600dpi.
User's Guide
Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected
results. However, lines in some colors may appear broken.
Cause
Cause
Cause
Printed colors of lines are inaccurate during HP-GL/2 printing
Corrective Action
In the Control Panel menu, set Oversize to Off.
(See "Menu Settings.")
Corrective Action
Set Detect img size to Command priority or Detected size in the
Control Panel menu.
(See "Menu Settings.")
P.445
➔
Set Conserve Paper to On in the Control Panel menu.
(See "Menu Settings.")
P.445
➔
Corrective Action
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.")
P.445
➔
Corrective Action
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.")
P.445
➔
Corrective Action
P.445
➔
629