Loading Rolls in the Printer
3
Open the Top Cover and lift the Ejection Guide.
4
Holding the Roll Holder so that the side with the white gear
faces the side of the Roll Holder Slot with a white gear,
load the Roll Holder shaft (a) into the grooves (b) on both
ends of the Roll Holder Slot.
Caution
Note
5
Using both hands, pull out the roll evenly on both ends and
insert it in the Paper Feed Slot (a). Advance the roll until
the buzzer sounds.
346
•
Be careful not to drop the roll and hurt yourself when loading it.
•
Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide grooves (b) when
loading rolls.
•
For instructions on attaching the Roll Holder to rolls, see "Attaching the Roll Holder to Rolls."
b
a
a
iPF840
b
P.342
➔
User's Guide