Resizing Originals by Entering a Scaling Value (Mac OS)
8
Make your selection in the
9
Make your selection in the
10
Access the Page Setup pane.
11
Select and click a roll paper in the
12
Select the paper width of the roll loaded in the printer for
is selected.
13
Select the
14
G
Click
Scaling and enter 120.
Note
15
Confirm the print settings, and then click
Note
82
E
Print Target list.
F
Print Quality list.
A
D
Enlarged/Reduced Printing check box.
•
You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of the
paper will not be printed.
•
If the original size after enlargement or reduction is smaller than the paper size, the original is printed in
the upper-left corner. In this case, you can center originals by selecting the
•
For tips on confirming print settings, see "Confirming Print Settings ."
Paper Source list.
B
Roll Width. In this case, ISO A2/A3 (420.0mm)
M
Print to start printing.
J
Print Centered check box.
P.270
➔
User's Guide
iPF840