Loading And Printing On Rolls - Canon iPF840 User Manual

Loading and Printing on Rolls

• The Ink Tank Cover is open
Close the Ink Tank Cover.
The Printhead is not installed
•
Please see "Replacing the Printhead."
• Ink Tank is not installed
Please see "Replacing Ink Tanks."
"ERROR" is shown on the Display Screen
•
Turn off the printer and contact your Canon dealer.
The Online lamp and Message lamp are not lit (even once), and nothing appears on the Display
•
Screen
Make sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet.
No paper is loaded
•
Load paper. (See "Loading and Printing on Rolls.")
Sheets.")
Turning the printer off
•
Never disconnect the printer's power supply or unplug it during a print job. This may damage the printer.
Important
1
Make sure no print jobs are in progress.
If the Message Lamp is flashing, check the message on
the Display Screen and take action as necessary. (See "Er-
ror Messages.")
If the Data Lamp is flashing, the printer is receiving a print
job. Turn off the printer only after printing is finished.
2
Hold down the Power button for more than a second.
After "Shut Down.. Please Wait.." is shown on the Display
Screen, the printer shuts off.
Loading and Printing on Rolls
Loading and Printing on Rolls
18
These are the basic steps for loading and printing on rolls.
Follow these steps to load and print on rolls.
➔
P.21
➔
P.636
➔
P.579
➔
P.566
(See "Loading and Printing on
P.18
➔
iPF840
User's Guide