Canon iPF840 User Manual page 597

iPF840
5
Push down the release lever (a) as shown as you gently re-
turn all ink tank lock levers to the original position.
6
Close the Ink Tank Cover.
At this point, ink is drawn out from inside the tubes.
•
Do not remove the Maintenance Cartridge except when the message for replacing it is displayed.
If you remove the Maintenance Cartridge while ink is being drawn out, the ink may leak out.
Important
7
When the process is finished, "Preparations for moving the printer finished. Turn the power off" is dis-
played.
When this happens, replace the Maintenance Cartridge currently being used with a new Maintenance Car-
tridge.
8
Press the Power button and turn off the printer.
Pack the printer
1
Disconnect the printer power cord and interface cable, as well as the Roll Unit power cord.
•
Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and
Important
follow this procedure again.
User's Guide
Preparing to Transfer the Printer
a
597