Preparing to Transfer the Printer
2
Open the Top Cover and lift the Ejection Guide.
3
Grasp the Belt, insert it between the Belt Stopper, and affix
the Belt Stopper with a hex screw at the position indicated.
Important
598
•
Here, the Belt Stopper is the one that was removed and stored after initial installation. Neglecting to
attach the Belt Stopper may damage the printer.
•
Do not touch the Linear Scale (a), Carriage Shaft (b),
or Ink Tube Stabilizer (c). Touching these parts may
damage them.
a
c
b
iPF840
User's Guide