Table of Contents
Advertisement
Quick Links
Caution
Introduction
Before setting up the printer, check the completed image of the printer you purchased and make sure you have enough space to set up the printer. It is
recommended that you reserve space of the following dimensions to allow you to work around the printer.
150mm
200mm
600mm
Installation space
2293 × 675 × 58
(W x D x H mm)
• If you are using the optional wheeled
output stacker, you should reserve space
of the same dimensions as the iPF840.
Set up the printer using the following procedure.
Only perform the steps for which the name of the model you purchased is
specified on the right of the printer.
Assemble the Stand
*
Install the Roll Unit
*
Install the Printer
Attach the Media Take-up Unit
*
Set Up the Output Stacker
*
Prepare to Turn the Power On
Install the Ink Tanks
Install the Printhead
Load Paper to Adjust the Printhead
Install the Software
Attach the Stacker
*
Store Accessories in the Pockets
How to Display the Electronic
Manuals
* Refer also to the Setup Guide for the accessories and options in the following
table.
-List of accessories and options
• Printer Stand
• Printer Stand
• BU-03 Wheeled output
(Roll unit support)
stacker (Option)
• BU-03 Wheeled output
• TU-06 Media take-up unit
stacker
(Option)
QT5-749-V
*
Q
T
5
7
4
1
9
V
Series
Series
•
Instructions in this Setup Guide show the iPF840 printer. Note that your printer may look different from these illustrations in some cases.
However, the basic operations are the same.
•
The markers used in this setup guide are
series.
Before Setting Up the Printer
100mm
200mm
200mm
600mm
Installation space
(P.3)
(P.3)
(P.3)
(P.5)
(P.5)
(P.5)
(P.7)
(P.9)
(P.10)
(P.11)
(P.17)
(P.17)
(P.18)
• Printer Stand
(Roll unit support)
• RS-0 Stacker
1
*
Series
for the iPF830 series,
150mm
100mm
200mm
2293 × 99 × 58
(W x D x H mm)
Overview of Setup
•
Even if you do not use the printer driver, be sure to install Media
Configuration Tool from the provided User Software CD-ROM. With Media
Configuration Tool, the paper types that are available in your area can be
registered to the printer. For instructions on installation, refer to "Install the
Software" on page . (In Windows, select Install Individual Software in
the Setup Menu window to install Media Configuration Tool only.)
Details for each step are given in this Setup Guide. Simply follow the instructions to
install the printer.
If an error message is displayed during setup or other problems occur, refer to
"Responding to Messages" on page 20.
•
Some items are included with the printer but not described in this manual.
Keep these items in a safe place after setup because they are used in
MEMO
various printing applications.
•
For instructions on the included items not described in this manual, refer to
the User's Guide.
•
A cable to connect the printer to a computer is not provided with the printer.
• Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of CANON
INC.
• Microsoft is a registered trademark of Microsoft Corporation.
• Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other
countries.
• Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• Mac, Mac OS, OS X and Bonjour are trademarks of Apple Inc., registered in the U.S. and other
countries.
• All other trademarks or registered trademarks described in this Setup Guide are the property of
their respective owners.
Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future reference.
for the iPF840 series, and
200mm
1500mm
900mm(*)
600mm
* This is the space that is required for
working between the stacker and
printer such as when replacing paper
or using the output stacker.
Installation space
2293 × 307 × 58
(W x D x H mm)
• Reserve space that does not have any steps so that there
are no obstacles to moving the Stacker.
©CANON INC. 205
ENG
for the iPF850
150mm
100mm
200mm
258mm
PRINTED IN CHINA
Advertisement
Table of Contents
Related Manuals for Canon imagePROGRAFi PF830 series
Summary of Contents for Canon imagePROGRAFi PF830 series
- Page 1 Install the Ink Tanks (P.7) Install the Printhead (P.9) • Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of CANON INC. • Microsoft is a registered trademark of Microsoft Corporation. Load Paper to Adjust the Printhead (P.10) •...
-
Page 2: Package Contents
Package Contents The product is packaged divided into several separate boxes. The wheeled output stacker and roll unit may be included in the box labeled "RB-0" depending on the region where you purchased the printer. The stacker and roll unit may be included in the box labeled "RS-0" depending on the region where you purchased the printer. ●... -
Page 3: Assemble The Stand
Assemble the Stand Assemble the stand on which you will install the printer. -> Refer to "Assemble the Stand" in the Printer Stand Setup Guide Install the Roll Unit Attach the roll unit to the stand. -> Refer to "Install the Roll Unit" in the Printer Stand Setup Guide Install the Printer Remove the packaging material on top of While two people hold the carrying handles... - Page 4 Align the triangles on the back of the printer and Stand when setting the printer on the Stand. Push in the roll unit. Secure the printer and Stand firmly together using four M4 hex screws on each side by the Allen Wrench.
- Page 5 Attach the Media Take-up Unit (Option) Attach the media take-up unit (optional) which automatically takes up printed roll paper. -> Refer to the Media Take-up Unit Setup Guide included with the media take-up unit Set Up the Output Stacker Attach the wheeled output stacker or stationary output stacker to collect ejected paper. ->...
- Page 6 (when using the stationary output stacker or the stacker) Lower the Ejection Guide. Close the Top Cover. Plug the power cord into the Power Supply Connector on the back of Plug the power cord into the outlet. the printer.
-
Page 7: Install The Ink Tanks
Install the Ink Tanks Install the 5 ink tanks. Press the Power button to turn on the When the following screen appears, use Select your local time zone and press printer. the ▲ and ▼ keys to select a language and press OK. - Page 8 Make sure the ink lamp lights red. Check that the ink lamp is alight, and then Repeat steps 5 to to mount each of the push the ink tank more strongly until it Ink Tanks. touches the base. Close the ink tank covers. •...
-
Page 9: Install The Printhead
Install the Printhead When Open top cover. is displayed on Pull the printhead fixer lever forward all Lift the printhead fixer cover (a) to open it the display screen, open the top cover. the way to open it completely. fully. At this time, make sure that no debris becomes adhere to the contacts (b) on the carriage. - Page 10 Load Paper to Adjust the Printhead Load the included paper and adjust the Printhead. Select type of paper for printhead adj. Open the top cover and lift the release • Do not touch the linear scale (a), is shown on the display screen. Use the lever.
-
Page 11: Install The Software
Request for cooperation with quality improvement of Canon Large Format Printer For development and marketing of products that better meet customer needs, Canon requests that you send information related to your Canon Large Format Printer to Canon through the Internet. Check the content of the "Extended Survey Program" window that is displayed during the software installation process. - Page 12 If you can agree Extended Survey If you can respond to the questionnaire, Confirm your questionnaire responses, Program, click Agree. click Next. and click Next. In the Printer Selection window, select In the Printer Installation dialog box, When the following dialog box is The printer is connected directly to a select Install with USB Connection, and displayed, make sure the printer is on and...
- Page 13 In the Printer Selection window, select When searching the available printer on When entering the printer's IP address The printer is connected to computers the network manually in a network and click Next. After reading the precautions in the Getting After reading the precautions in the Getting Ready window, select Find Ready window, select Specify the IP...
- Page 14 When the printer cannot be found on the network If your printer cannot be found when connecting to On the tab selection screen of the control Use the ▲ and ▼ keys to select Interface the network for the first time, setup an IP address panel, press the keys to select Setup and press OK.
- Page 15 Mac OS You can print from Mac OS via USB or network connections such as Bonjour or IP. Install the software depending on your computer environment. <Compatible Operating Systems> OS X v0.6.8 to v0.9 Install the software • If you install the software, log onto the After making sure the printer is not On the desktop, double-click the CD-ROM computer as an administrator.
- Page 16 Select the printer Select the method of connecting to the Click Add Printer. Select the printer to add from Default and printer, and click Next. click Add. For USB connection, the printer is automatically added and you should proceed to step 7. •...
-
Page 17: Store Accessories In The Pockets
Attach the Stacker Attach the stacker for collecting paper ejected by printing to roll paper. -> Refer to the Stacker Setup Guide included with the stacker Store Accessories in the Pockets Use the manual pocket to store the manual so you can refer to it as Store accessories such as the 3-inch paper core attachment in the needed. - Page 18 How to Display the Electronic Manuals The electronic manuals for this printer are the User's Guide, Paper Reference Guide, and Basic Guide. For details on the content of each manual, refer to "The Manuals Supplied with This Printer" on P. 2. Viewing the User's Guide and Paper Reference Guide The User's Guide and Paper Reference Guide are not included with the printer.
- Page 19 Select the printer from the list of printers Click Utility. Click Open Printer Utility. and click Options & Supplies. Click the User Manual button. To display the user guide, click User's Click Support. Guide. To display the Paper Reference Guide, click Paper Reference Guide.
-
Page 20: Responding To Messages
Turn off the printer and wait at least three seconds before restoring resolved. the power. If the message appears again, write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. ERROR Exxx-xxxx You may have encountered an error that cannot be...