Cutting Roll Paper After Printing (Mac Os) - Canon iPF840 User Manual

Cutting Roll Paper After Printing (Mac OS)

Cutting Roll Paper After Printing (Mac OS)
Cutting Roll Paper After Printing (Mac OS)
This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to
print a cut line for manual cutting.
•
The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps
below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
Note
1
Choose Page Setup from the application menu to
display the Page Attributes dialog box.
Note
2
Select the printer in the
3
Choose the original size in the
4
F
Click OK to close the dialog box.
5
Choose Print in the application menu.
6
Access the Page Setup pane.
154
7
Select and click a roll paper in the
Page Setup might not be displayed in the menu de-
•
pending on the OS you are using and the applica-
tion software.
In this case, select Print from the menu in the appli-
cation software, and configure the settings in the up-
per part of the printer driver screen that is displayed.
B
Format for list.
C
Paper Size list.
A
Paper Source list.
iPF840
User's Guide