Using Favorites; Cutting Roll Paper After Printing - Canon iPF840 User Manual

Large format printer

Hide thumbs Also See for iPF840:

Table of Contents

Using Favorites

Access the Page Setup pane.

Select and click a roll paper in the

Select the paper width of the roll loaded in the printer for

is selected.

Confirm the print settings, and then click

Using Favorites

You can register print settings as Favorites to reuse settings from a particular job that met your expectations, or

settings for a particular page size that you will use repeatedly.

Registering a favorite for later use. You can choose the settings you have registered from a list before printing,

and you can check the settings details.

You can also save the favorite settings as files. Using these files is a convenient way to print under the same

conditions on another computer. (In Windows.)

For instructions on using favorites to print, refer to the following topics, as appropriate for your operating sys-

Using Favorites (Windows)

Using Favorites (Mac OS)

Roll paper can be automatically cut after printing.

It may not be possible to cut certain types of paper, such as adhesive paper. For details on types of paper that

cannot be used with the auto cut feature, see the Paper Reference Guide. (See "Types of Paper.")

Automatic Cutting

Roll paper is cut automatically after printing. If you prefer, you can print continuously without cutting the roll, or

you can print a cut line.

For instructions on cutting roll paper after printing, refer to the following topics, as appropriate for your operat-

For tips on confirming print settings, see "Confirming Print Settings ."

Paper Source list.

Roll Width. In this case, ISO A2/A3 (420.0mm)

Print to start printing.

User's Guide