Canon iPF840 User Manual page 349

iPF840
4
Holding the Roll Holder so that the side with the white gear
faces the side of the Roll Holder Slot with a white gear,
load the Roll Holder shaft (a) into the grooves (b) on both
ends of the Roll Holder Slot.
•
Be careful not to drop the roll and hurt yourself when loading it.
•
Caution
Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide grooves (b) when
loading rolls.
•
For instructions on attaching the Roll Holder to rolls, see "Attaching the Roll Holder to Rolls."
Note
5
Pull out the roll evenly on both ends and insert it in the Pa-
per Feed Slot (a). Advance the roll until the buzzer sounds.
•
Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the
printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing
Important
surface.
•
If the paper is wrinkled or warped, straighten it out before loading it.
• Load the roll so that there is no gap between the right
edge of the paper and the Roll Holder.
User's Guide
Loading Rolls in the Printer
b a a b
P.342
➔
349