Empty Key
You can set a softkey to force a blank entry on the IP phone display for a specific softkey. You do this by setting the softkey
to "empty". The softkeys are added in order (from softkey1 to softkey20) after any hard-coded keys have been added. If a
particular softkey is not defined, it is ignored.
Configuring an Empty Key
Aastra Web UI
Use the following procedure to configure an Empty softkey on the 9480i CT phone.
1.
Click Operation->Softkeys and XML.
Softkeys
2.
Select from "Key 1" through "Key 20".
3.
In the "Type" field, select Empty.
4.
Check (enable) or uncheck (disable) the states you want to apply to this softkey.
5.
Click Save Settings.
41-001381-05 REV03 – 07.2014
Line Keys and Softkeys
92