Requirements; Installation And Setup - Aastra 9480i CT User Manual

Cordless Handset Features
• 5-line backlit display screen
• 2 multi-functional softkeys
• Programmable function key supports up to 14 functions
• Vibration Alerter
• Headset Jack
• Desk charging stand Requirements

Requirements

The 9480i CT IP Phone requires the following environment:
• SIP-based IP PBX system or network installed and running with a SIP account created for the 9480i CT phone.
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server, or
Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).
• Ethernet/Fast Ethernet LAN (10/100 Mbps)
• Category 5/5e straight through cabling
• Power source
– For Ethernet networks that supply in-line power to the phone (IEEE 802.3af):
– For power, use the Ethernet cable (supplied) to connect from the phone directly to the network for power. (No
48v AC power adapter required.)
– For Ethernet networks that DO NOT supply power to the phone:
– For power, use the 48V AC Power Adapter (included) to connect from the DC power port on the phone to a power
source.
or
– (optional) - For power, use a Power over Ethernet (PoE) power injector or a PoE switch. A PoE power injector is
available as an optional accessory from Aastra. Contact your Administrator for more information.

Installation and Setup

If your System Administrator has not already setup your 9480i CT phone, please refer to the Aastra 9480i CT Installation
Guide for basic installation and physical setup information. For more advanced administration and configuration informa-
tion, System Administrators should refer to the Aastra SIP IP Phones Administrator Guide.
41-001381-05 REV03 – 07.2014
Welcome
2