Managing Calls
On Screen 2:
•
You can add a label or URI using the abc softkey; Or you can populate the "Label" field with a pre-
defined label (Office, Home, Cell, Pager) by pressing the Label softkey.
•
Use the Backspace softkey when required.
•
Use the Save softkey when you are finished adding the Label.
•
You can exit from Screen 2 at any time without saving by pressing the Cancel softkey.
Edit Entries in the Directory List
IP Phone UI
On Screen 1, when the cursor is in the "Line" field, softkey 5 displays a Change softkey. The following example illustrates
a Directory entry for "Steve Smith", with a phone number and an "Office" label. Since the cursor is in the "Line" field, the
Change softkey displays.
The following example shows the same Directory entry without a label.
•
You can use the Dial softkey to automatically dial the number in the Directory entry.
•
You can use the Add Number softkey to add additional numbers to the current Directory entry (up to
7 numbers per name).
•
You can use the Delete softkey to delete a number or to delete multiple numbers in an entry (see
"Delete Entries from the Directory List"
•
You can use the Change softkey to change a number or a name.
•
You can use the Quit softkey to quit the editing of the current Directory entry.
113
001 Steve Smith
Office
9057609999
Line: 1
Dial
Delete
Change
Add Number
001 Steve Smith
9057609999
Line: 1
Dial
Delete
Change
Add Number
on
page 116.
List
List
41-001381-05 REV03 – 07.2014