Aastra 9480i CT User Manual page 69

Configuring a BLF/List Key
The BLF/List function can be configured on the 9480i CT using the Aastra Web UI only.
If you set a key to use BLF/List, you must also enter a BLF List URI at Operation->Softkeys and XML->Services. The BLF
List URI is the name of the BLF list defined on the BroadSoft BroadWorks Busy Lamp field page for your particular user. For
example, sip:9@192.168.104.13. The value of the BLF\List URI parameter must match the list name configured. Otherwise,
no values display on the 9480i CT screen and the feature is disabled.
Aastra Web UI
Use the following procedure to set a key to function as "BLF/List".
1. Click Operation->Softkeys and XML.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select "BLF/List" (BroadSoft BroadWorks).
Note:
The "Label" and "Value" field are not required. The BroadWorks BLF List name is configured in the "BLF List URI" field
instead.
4. In the "Line" field, select a line number that is actively registered to the appropriate SIP proxy you are using.
5. Check (enable) or uncheck (disable) the states you want to apply to this softkey.
41-001381-05 REV03 – 07.2014
Line Keys and Softkeys
62