Aastra 9480i CT User Manual page 53

Softkey Type
Speeddial/Conf
Speeddial/MWI
Directory
Callers List
Filter
Intercom
Services
Phone Lock
Paging
Empty
In the Aastra Web UI, the operational states for each softkey display enabled. To disable a state, you uncheck the box for
that state.
Key Display Behavior
On the 9480i CT IP Phone, you can configure up to 20 functions on the softkeys. If you have no softkeys configured on the
IP Phone, and you assign softkey functions to higher number keys in the Aastra Web UI, the key functions automatically
appear in the first available position on the LCD display.
For example, if softkeys 1 through 20 are set to "None", and you set softkey 12 as the following:
Type: speed dial
Label: LAB
Value: 3456
after saving the settings, the "LAB" label actually appears in position 1 of the LCD.
A softkey function of "none" does not display on the idle screen at all.
41-001381-05 REV03 – 07.2014
Default States
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
All states disabled.
All states disabled.
idle, connected, incoming, outgoing, busy
Line Keys and Softkeys
46