Multifunction Handset Led Indicator; Using Handset Keys - Aastra 9480i CT User Manual

Accessing Options on the Cordless Handset

Multifunction Handset LED Indicator

The multifunction Handset LED provides the following user feedback:
When LED is
Flashing slow
Flashing rapid
Flashing intermittently
Flashing intermittently
Solid

Using Handset Keys

{ }
UP Arrow Keys( or )
Your 9480i CT cordless handset has two UP Arrow keys directly under the LCD display. These are softkeys that change
depending on the phone's state, displaying relevant keys only. These softkeys are pre-programmed for the call handling
and extension management features.
v
Talk /Hold Key
The Talk/Hold key v is a multi-purpose key with the following uses:
• To initiate a call by seizing the line or through pre-dial.
• To answer a call during ringing.
• To place a call on hold during an active call.
v
Hold Key
Press the hold key v while on a call to place the call on hold. While a call is on hold, and if there are no other active
•
calls, the LED flashes at the hold rate and the display presents the Call is on Hold prompt. In addition, a held call
reminder tone is played in the form of a short ring burst (flash ring).
Note:
The handset is equipped with an auto-hold feature. While on an active call, pressing any other line key results in the
current line being placed on hold and the new line being seized.
y
Release Key ( )
The release key is a multi-purpose key with the following uses:
• To end a call
153
This indicates
Message is waiting (Message Waiting Indicator)
"Alert" status is present
Mute is enabled on the Phone
Hold is enabled on the Active call
Active call is present
41-001381-05 REV03 – 07.2014