None Key - Aastra 9480i CT User Manual

Line Keys and Softkeys

None Key

You can set a key to force a blank entry on the IP phone display for a specific key. You do this by setting the key to "none".
The keys are added in order (from key 1 to key 20) after any hard-coded keys have been added. If a particular key is not
defined, it is ignored. For more information about key behavior, see
Configuring a None Key
Aastra Web UI
Use the following procedure to configure a None key on the 9480i CT IP Phone.
1. Click Operation->Softkeys and XML.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select None.
4. Check (enable) or uncheck (disable) the states you want to apply to this softkey.
5. Click Save Settings.
91
"Key Display Behavior" on page 46.
41-001381-05 REV03 – 07.2014