Aastra 9480i CT User Manual page 135

DND in Custom Mode
1. Press the DND key on the phone. The screen displays a list of the accounts on the phone and allows you to ena-
ble/disable a specific account or all accounts. Use the UP and DOWN arrow keys to scroll through the accounts.
DND
Change
All Off
All On
In the above example, Screenname1 and 3 have DND ON as indicated by a check mark (
off as indicated by an X. The ALL ON and ALL OFF softkeys allow you to enable or disable DND on all accounts,
respectively.
2. You use the CHANGE key to enable or disable DND for a specific account selected.
3. Press DONE to save the change.
Call Forward Account-Based Configuration
Call Forward (CFWD) on the IP phone allows incoming calls to be forwarded to another destination.
On the 9480i CT, you can set Call Forward (CFWD) on the phone-side for a specific account or for all accounts on the
phone. You can set a CFWD mode using the Aastra Web UI at the path, Basic Settings->Preferences->General->Call For-
ward Key Mode: Account (default), Phone, and Custom. CFWD performs according to the mode you set.
You can configure CFWD using the Aastra Web UI at the path, Basic Settings->Account Configuration, OR you can config-
ure CFWD using the IP Phone UI at the path, Options->Call Forward.
Using the Aastra Web UI at the path, Operation->Softkeys and XML, you can also configure a CFWD key for the phone (or
for an expansion module) to use as a shortcut for accessing the CFWD menu on the phone.
The following describes the behavior for each CFWD mode.
• Account - (default) The account mode allows you to configure CFWD on a per account basis. Pressing a configured
CFWD key applies to the account in focus.
• Phone - The Phone mode allows you to set the same CFWD configuration for all accounts (All, Busy, and/or No
Answer). When you configure the initial account, the phone applies the configuration to all other accounts. (In the Aas-
tra Web UI, only the account you configured is enabled. All other accounts are grayed out but set to the same configura-
tion.) Using the Aastra Web UI, if you make changes to that initial account, the changes apply to all accounts on the
phone.
• Custom - The Custom mode allows you to configure CFWD for a specific account or all accounts. You can configure a
specific mode (All, Busy, and/or No Answer) for each account independently or all accounts. On the 9480i CT, you can
set all accounts to All On, All Off, or copy the configuration for the account in focus to all other accounts using a Copy-
toAll softkey.
Note:
If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves as if the
mode was set to "Phone".
You can enable different CFWD rules/modes independently (for example, you can set different phone numbers for Busy,
All, and NoAnswer modes and then turn them on/off individually).
41-001381-05 REV03 – 07.2014
1.Screenname1
2.Screenname2 X
3.Screenname3
Cancel
Done
Indicates
DND On
Indicates
DND Off

). Screenname2 has DND
Managing Calls
128