Making Calls From Cordless Handset; Pre-Dialing A; Number; Using A Headset - Aastra 9480i CT User Manual

Making Calls from Cordless Handset

Pre-dialing a Number
Handset UI
Press the v key to obtain dial tone and use the Keypad to dial the number.
1.
You can also make a call by pre-dialing a number. Pre-dialing lets you view a number before you dial.
If the number is correct, press the v key to dial the number.
2.
If the number is incorrect, use the  key or press down on the volume key to erase digits from right to left.
3.
Calls can also be made directly from the Directory.

Using a Headset

The 9480i CT cordless handset accepts headsets through the 2.5 mm audio jack on the bottom of the phone. Contact your
telephone equipment retailer or distributor to purchase a compatible headset. Customers should read and observe all
safety recommendations contained in headset operating guides when using any headset.

Receiving Calls

Handset UI
• When a call is ringing at your extension, the handset displays the Inbound Call screen.
Press the v key to answer an incoming call or lift the handset out of the charging cradle.
•

Call Privacy

In the 9480i CT multi-handset system, it is possible to connect several cordless handsets together with each other or with
the base as extensions to a call. This is just like an analog system with extension phones going off hook to join a call in
progress. However, because this system is actually intended for use in an enterprise environment, some method of call pri-
vacy is required.
All calls, base or handset, begin in the "private" mode. In this mode, no extensions are allowed to join that handset or
base call. A user interface provides the ability to toggle between the "Private" and "Public" modes. For more information
about public and private keys, see
"Public" and "Private" Feature Key
A feature key is available in the feature list for the user to press, to toggle between the "Private" and "Public" modes for a
call. Pressing the Public feature key in the feature list anytime during a call, puts the call into the public call mode. When
the call is in public call mode, the triangle indicator lights in front of the Public label in the feature list. This also causes that
feature key to appear on an available softkey but with a different label – Private. The user can then press the Private
softkey to toggle the call back to private, or he can navigate into the feature list and press the Public feature key.
41-001381-05 REV03 – 07.2014
""Public" and "Private" Feature Key" on page 160.
160