Empty Key - Aastra 9480i User Manual
Hide thumbs
Also See for 9480i:
- User manual (294 pages) ,
- Admin manual (8 pages) ,
- Administrator's manual (1184 pages)
Table of Contents
Advertisement
Line Keys and Softkeys
Empty Key
You can set a softkey to force a blank entry on the IP phone display for a specific softkey. You do this by setting the
softkey to "empty". The softkeys are added in order (from softkey1 to softkey20) after any hard-coded keys have been
added. If a particular softkey is not defined, it is ignored.
Configuring an Empty Key
Aastra Web UI
Use the following procedure to configure an Empty softkey on the 9480i phone.
1.
Click Operation->Softkeys and XML.
Softkeys
2.
Select from "Key 1" through "Key 20".
3.
In the "Type" field, select Empty.
4.
Check (enable) or uncheck (disable) the states you want to apply to this softkey.
5.
Click Save Settings.
92
41-001382-05 REV03 – 07.2014
Advertisement
Table of Contents
