None Key - Aastra 6757i CT User Manual

Line Keys and Softkeys
Note:
If you enable global DND on the phone, the incoming multicast RTP session is dropped.

None Key

You can set a softkey, or expansion module key to force a blank entry on the IP phone display for a specific key. You do
this by setting the key to "None". The keys are added in order (from key1 to key20) after any hard-coded keys have been
added. If a particular key is not defined, it is ignored. For more information about key behavior, see
ior" on page 51.
Configuring a None Key
Aastra Web UI
Use the following procedure to configure a None key on the 6757i CT IP Phone. The procedure shows the softkey screen
as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 10" on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select None.
Expansion Module Keys
4. Select from "Key 1" through "Key 36" (M670i).
or
Select from "Key 1" through "Key 60" (M675i).
111
"Key Display Behav-
41-001384-05 REV03 – 07.2014