Making Calls From Cordless Handset - Aastra 6757i CT User Manual

Making Calls from Cordless Handset

Pre-dialing a Number
Handset UI
Press the v key to obtain dial tone and use the Keypad to dial the number.
1.
You can also make a call by pre-dialing a number. Pre-dialing lets you view a number before you dial.
f the number is correct, press the v key to dial the number.
2.
If the number is incorrect, use the  key or press down on the volume key to erase digits from right to left.
3.
Calls can also be made directly from the Directory.
Using a Headset
The 6757i CT cordless handset accepts headsets through the 2.5 mm audio jack on the bottom of the phone. Contact
your telephone equipment retailer or distributor to purchase a compatible headset. Customers should read and observe
all safety recommendations contained in headset operating guides when using any headset.
Receiving Calls
Handset UI
• When a call is ringing at your extension, the handset displays the Inbound Call screen.
Press the v key to answer an incoming call or lift the handset out of the charging cradle.
•
Call Privacy
In the 6757i CT multi-handset system, it is possible to connect several cordless handsets together with each other or
with the base as extensions to a call. This is just like an analog system with extension phones going off hook to join a call
in progress. However, because this system is actually intended for use in an enterprise environment, some method of call
privacy is required.
All calls, base or handset, begin in the "private" mode. In this mode, no extensions are allowed to join that handset or
base call. A user interface provides the ability to toggle between the "Private" and "Public" modes. For more informa-
tion about public and private keys, see
"Public" and "Private" Feature Key
A feature key is available in the feature list for the user to press, to toggle between the "Private" and "Public" modes for
a call. Pressing the Public feature key in the feature list anytime during a call, puts the call into the public call mode.
When the call is in public call mode, the triangle indicator lights in front of the Public label in the feature list. This also
causes that feature key to appear on an available softkey but with a different label – Private. The user can then press the
Private softkey to toggle the call back to private, or he can navigate into the feature list and press the Public feature key.
186
""Public" and "Private" Feature Key" on page 186.
41-001384-00 Rev 01 – 06.2013